Control Panel And Keys - Klarstein DRYFY 20 Mode D'emploi

EN

CONTROL PANEL AND KEYS

Timer: 24 hours timing, press the key, to set the timing off or timing on, timing
range is from 1 to 24hours, it will increase 1hour by each press. Press the key
again, timing can be canceled.
Internal drying function: press the key to start the inside drying function. The
drying function prevents molding from forming inside the dehumidifier.
Fan: In Auto dehumidifying and cloth dry mode, press this button to change
fan speed, high-low-high.
Display screen: In Auto dehumidifying or cloth dry mode, it will indicate the
actual room humidity. In timing mode, it indicates the setting time.
Humidity setting: In Auto dehumidifying mode, press the key to set humidity,
humidity range is from 30 % to 80 %, it increases 5 % by every press.
Mode: When power on or timing power on, press this button to choose auto
dehumidifying or continuous dehumidifying (dry cloth function). The lights will
flash when choose the modes. Press MODE key for 3 seconds to lock/
unlock the control panel.
On/Off: Press the key to turn on/turn off the unit.
17