Technical Data - HBM Machines 55019HBM Manuel D'utilisation

TECHNICAL DATA

Nominal frequency
Nominal voltage
Power
Starting power
Overload protection
Phase
Motor
Engine displacement
Fuel
Fuel tank capacity
Fuel consumption
Continuous use
Oil
Oil reservoir capacity
Spark plug
Dimensions
Weight
Sound (K=3 dB(A))
L sound pressure
pA
L sound power
WA
GUARANTEE
Refer to the enclosed guarantee conditions for the terms and conditions of
guarantee.
ENVIRONMENT
DISPOSAL
Your product, accessories and packaging should be sorted for
environmental-friendly recycling.
ONLY FOR EC COUNTRIES
Do not dispose of power tools into domestic waste. According to the European
Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are no longer usable must be
collected separately and disposed of in an environmentally friendly way.
BATTERIES
Unwanted batteries must be disposed of in an environmentally friendly
manner and in accordance with local regulations.
• Discharge the battery by running the machine at no load until the engine stops.
• Remove the battery from the machine.
• Take the battery as chemical waste to the recycling station in your municipality.
ONLY FOR EC COUNTRIES
Defective or dead (rechargeable) batteries must be disposed of in accordance with
Directive 91/157 / EEC.
Subject to change; specifications can be changed without further notice.
55019HBM
Hz 50
V 230
kW 3.8
kW 4.2
DC without fuse
single
4-stroke, air-cooled
cc 223
unleaded Euro 95 (E10)
l 10
g/kW-h < 395
hours 5
4-stroke SAE 10W-30
l 0.55
type F6RTC/F7RTC
mm 605×432×493
kg 95
dB(A) 92
dB(A) 45
17