Flex L 12-3 100 WET Notice D'utilisation page 8

Instruction manual
Some examples of these chemicals
are:
– Lead from lead-based paints.
– Crystalline silica from bricks,
cement, and other masonry
products.
– Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending upon how often you do this
type of work. To reduce your exposure
to these chemicals:
– Work in a well-ventilated area.
– Work with approved safety
equipment, such as dust masks that
are specially designed to filter out
microscopic particles.
– Avoid prolonged contact with dust
from power sanding, sawing,
grinding, drilling, and other
construction activities. Wear
protective clothing and wash
exposed areas with soap and water.
SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE
TO OTHER USERS AND OWNERS OF THIS TOOL!
8
Allowing dust to get into your mouth
or eyes or to lie on the skin may
promote absorption of harmful
chemicals.
DEFINITIONS FOR SYMBOLS
USED ON THIS TOOL
Refer to instruction manual!
Wear goggles!
V............ volts
~
........... alternating current
Hz ......... hertz
A............ amperes
n ............ rated speed
n .......... no load speed
o
-1
min ...... revolutions per minute
L/LE 12-3 100 WET