Specifications & Features - Velleman HPS140i Mode D'emploi

Specifications & Features
40 Megasamples/s in real time
Bandwidth up to 10MHz
Full auto-range option
Sensitivity down to 0.1mV
Signal markers for amplitude and time
Memory 'Hold'-function
Direct Audio Power Measurement (Watts)
USB battery charger included
X10 measuring probe included with HSP140i
Specifications:
• Bandwidth: up to 10 MHz (-3dB or -4dB at selected ranges)
• Input range: 1mV to 20V/division in 14 steps
• Input coupling: DC, AC and GND
• Real-time sample rate up to 40MS/s
• AD resolution: 8 bits
• Time base: 250ns to 1h per division
• Auto set-up function (or manual)
• Probe x10 readout option
• x10 probe test signal on backside
• Readouts: DC, AC+DC,True RMS, dBm, Vpp, Min-Max. (±2.5%)
• Audio power measurement into 2 to 32 ohms
• 'Hold'- & store function
• Time and Voltage markers readout
• Input : 100Vp AC+DC max.
• White LED backlight
• NiMH rechargeable battery pack (BPHPS140 included)
• Operates up to 6 hours on a single charge
• Charging power supply: 9Vdc/200mA
• For use on CLASS II pollution degree II installations
• Dimensions: 74x114x29mm ( 2.9x4.5x1.14)"
• Weight: 200g, (7oz)
1
Do not operate the device while charging from the USB charger. Use a standard 9Vdc mains adaptor if opera-
tion during charging is required.
1
- 4 -