Ega Master 62951 Manuel D'instructions page 5

ENGLISH
You have purchased a high quality Torque Wrench; a robust precision instrument.
Please read and carefully observe the following operating instructions, in order to achieve the
maximum performance to the article you have purchased.
1. Lock mechanism
2. Handle and adjustment mechanism
3. Analogue torque display
4. Turning change system
5. Square drive.
1. This torque wrench is a precision instrument, designed to be used only to tighten screws bolts
and nuts to a desired torque.
2. Do not apply torque in excess of the maximum capacity of the wrench.
3. Only apply load on the handle, and do not use any handle extension bars.
4. Pay special attention to the setting torque of the wrench to prevent equipment damage by excess
or defect of the applied torque.
1. Pull the lock mechanism out.
2. Set desired torque by turning the handle, it will be displayed on the analogue display.
LEGEND
GOOD USING ADVICES (READ BEFORE USING)
SETTING TORQUE
3
4
2
5
1
5