Nostalgia Products Group RETRO COTTON CANDY MACHINE RCM-605 Mode D'emploi page 6

ENGLISH
IMPORTANT NOTES AND ILLUSTRATIONS (Continued)
Figure A
Removing the Extractor Head Assembly
Figure C
Metal tab on unit fitted with plastic tab
on bowl to Lock and Unlock extractor head
Figure E
Turning the cone with your fingers,
while holding the cone in the horizontal position.
CLEANING
1. Make sure unit is unplugged and has had time to cool down before cleaning.
2. After cooling, remove the extractor head assembly by pulling straight up.
NOTE: You may want to use pliers to get a good grip on the small center
piece. UNLOCK bowl by turning clockwise and remove (See page 4, Figure A & B
& C). Wash both in warm water, rinse and dry.
3. Use a slightly damp, non-abrasive sponge or non-abrasive towel to wipe clean the
outside of the unit, wipe with a non-abrasive soft towel to dry.
The RETRO COTTON CANDY MACHINE breaks down to – body, bowl, and extractor
head assembly for easy cleaning. (See Figure F above)
4
Figure B
Extractor Head showing groove that fits
over stem
Figure D
Pouring sugar into receptacle
Figure F
Breaks down to bowl, machine
Body and Extractor head.