Kichler Motu 330010 Manuel D'instructions page 10

9
Outlet box
Fig. 19
BLACK
(TO MOTOR L)
TO
BLACK
(CEILIING FAN SUPPLY)
GREEN/YELLOW
TO HOUSEHOLD
GREEN / BARE
4
3
2
1
-
KICHLER
R
BLACK (TO AC IN L) TO
HOUSEHOLD BLACK
Fig. 20
Switch
Wall plate
CEILING FAN
SUPPLY WIRES
GREEN or
BARE
HOUSEHOLD
WHITE TO
WHITE (CEILIING
FAN SUPPLY)
HOUSEHOLD
WIRING
12. INSTALLING THE BASIC FUNCTION
WALL CONTROL SYSTEM WALL PLATE
Select a location to install the Basic Function Wall
Control System Transmitter and Wall Plate.
Install the wall plate using an existing wall switch
outlet box. Make sure the electrical power is
TURNED OFF at the main panel before continuing.
Step 1. Remove the existing wall plate and the old
switch from the wall outlet box. (Fig. 19)
Step 2. Connect the green/yellow wire from wall
control to the green or bare wires in the outlet box,
secure with the wire nut. (Fig. 20)
Step 3. Connect the household white wire to the
white wire to the ceiling fan, secure with a wire nut.
(Fig. 20)
Step 4. Connect the household black wire to the
black wire marked "TO POWER SUPPLY", secure
with a wire nut.
Step 5. Connect the household black wire to the
black wire marked "TO FAN", secure with a wire
nut. (Fig. 20)
Step 6. Separate the black wires from the white
and green wires. Turn the green and white wires
into the outlet box. (Fig. 20)
Step 7. Turn the black wires into the outlet box.
(Fig. 20)