AudioMX HG-11B Manuel De L'utilisateur page 6

1
2
3
Low battery indication
When the remaining battery power becomes low, the power indicator on the
headphones will begin flashing, and a beep sound will be heard once a minute. If
this situation continues for five minutes, the headphones will automatically turn
off.
5
Charging the headphones
1. Connect the supplied AC adaptor to the DC inlet on the transmitter and plug
the adaptor into an electrical outlet socket.
2. Mount the headphones on the transmitter so that the headphones' charging
contacts align with the contacts on the transmitter (fig.1). When charging
begins, the transmitter's POWER/CHARGE indicator light will show red. When
charging is completed, the indicator will go out and the transmitter will
automatically switch to standby mode.
3. It takes about 6 hours to complete charging. A full battery charge will allow the
headphones to operate about 12 hours.
Note
• Use only the supplied AC adaptor with this unit. Using other AC adaptors may
cause a malfunction.
• In order to protect the batteries, do not repeatedly charge the headphones or
leave them charging when they are already fully charged.
fig.1
6