Machine And Manufacturer's Identification Data; Appliance Identification; Declaration Of Conformity; Copyright - Electrolux AOSOH610E Manuel D'utilisation

A4 Machine and Manufacturer's identification
data
A reproduction of the marking or data plate on the
machine is given.
XXXXXXXXXXXXXXXXXXXXXXXXXXX
Made in UE
Model XXXXXX
PNC XXXX XXXXXXXXXX
XXX V XX Hz X,XX kW
IP XX
Figure 7 Reproduction
marking/data plate
The data plate gives the product identification and
technical data; listed below is the meaning of the various
information given on it:
Model ..................... factory description of the model
PNC ....................... production number code
Ser. No. .................. serial number
xxx V ...................... power supply voltage
xxx Hz .................... power supply frequency
xxx kW ................... max. power input
The plate is located inside the equipment, at the inner
front of the hood.
ATTENTION!
Do not remove, tamper with or make
the machine "CE" marking illegible.
ATTENTION!
Refer to the data given on the machine
"CE" marking for relations with the
Manufacturer (e.g. when ordering spare
parts, etc.).
ATTENTION!
When scrapping the machine, the "CE"
marking must be destroyed.
A5

Appliance identification

This manual applies only to the model: "ODOURLESS"
HOOD.
For more details refer to Table 2"Main technical
characteristics, performance and consumption".
A6

Declaration of conformity

Electrolux Professional SpA declares that the product
relevant to this manual is for professional use and
complies with the requirements of EC directives
2004/108/EC and 2006/42/EC
amended. The corporate body authorised to construct
the technical file is the manufacturer. Further information
is given in the declaration of conformity accompanying
K
Ser. No. XXXXXXXX
X ph XX A
XX XXXX
of
on the machine.
2006/95/EC
the machine and provided separately to this manual.
A7

Copyright

This manual is intended solely for consultation by the
operator and can only be given to third parties with the
permission of Electrolux Professional S.p.A.
A8

Responsibility

The instructions supplied with the machine take into
account the experience and knowledge acquired to
date by the Manufacturer. The instructions are updated
to the month and year given in the box in the bottom
right on the cover. The edition corresponds to the
the
manual revision number. Every new edition replaces
and cancels the previous ones.
Document
Number
Figure 8 Example
and document
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• Non-compliance with the instructions given in this
manual;
• Repairs not carried out in a workmanlike fashion, and
replacements using spare parts different from those
specified in the spare parts catalogue (the fitting and
use of non-original spare parts and accessories can
negatively affect machine operation);
• Operations by non-specialised technicians;
• Unauthorised modifications or interventions;
• Inadequate maintenance;
• Improper machine use;
• Unforeseeable extraordinary events;
• Use of the machine by uninformed and untrained
personnel;
• Non-application of the current provisions in the country
of use, concerning safety, hygiene and health in the
workplace.
The Manufacturer declines any liability for damage
caused by arbitrary modifications and conversions
carried out by the user or the Customer.
The employer or workplace manager is responsible
for identifying and choosing adequate and suitable
as
personal protection equipment to be worn by operators,
in compliance with current regulations in the country
of use.
27
DOC. NO. 05953.302.01
EDITION: 2 092016
Edition
Month Year
of
identification
edition
data