Velux INTEGRA KLF 200 Manuel D'installation Et Mode D'emploi page 17

Function as interface
Registration with VELUX INTEGRA
13
14
Connect the supplied wire bundle to the input terminal. Press the
RESET button on the back of the interface briefly (1 second) with a
pointed object. The light-emitting diode flashes white rapidly.
Step 15 must now be carried out within 2 minutes.
Note: Take care that the red and black wire ends do not touch each
other at this point, as they may short-circuit. A short-circuit will
result in an unintended registration of products.
ENGLISH
control pad KLR 200
®
Tick the chosen product(s)
Tap
2
1
1 sec
2
.
.
1
VELUX 17
®