Publicité
Les langues disponibles
Les langues disponibles
FIGURE 1
FIGURE 2
FIGURE 3
Information may vary with application. All specifications listed are based on the latest production information available at the time of
printing.
Anniversary Edition 427 (19166392) Specifications REV15JA15
TITLE
Install all cylinder head studs with oil
finger tight only. ALUM - same as above
but tighten studs to 100 in-lbs before
tightening nuts to 25 / 70 ft-lbs in two
repetitions.
Apply oil to studs. Install into block to with 100
inch pound torque. Apply 50 ft-lbs to nuts 1-10
then apply 95 ft-lbs to nuts 1-10. Then apply 85
ft-lbs torque to nuts #11 through #20. Assembly
lube provided with aluminum block.
19211812
PART NO.
5
24
SHEET
OF
Publicité
