Ayce LMA8050D Manuel D'utilisation page 99

Unpacking
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing (if
available).
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.
ATTENTION
The device and packaging materials are not toys! Children must not be allowed to play
with plastic bags, film and small parts! There is a risk of swallowing and suffocation.
Assembly
1. Take the mower and attachment parts out of the packaging and check that all parts
are present.
2. Align the holes in the lower handle. Put the cam locks through (16) the holes. Tighten
the knobs onto the cam locks (16). Do the same operation on the other side. (Fig. 2).
3. Attach the upper push bar on the lower push bar with one plastic nut (c) and one
screw (d) each on both sides (Fig. 3-4).
4. Fix the cables to the push bar with the cable clips (5) provided (Fig. 5).
5. Fix the handle bar (6) on the grass catcher box (4) (Fig. 6).
6. Mowing with grass box: Lift the discharge flap with one hand and hang the grass box
(4) as shown in Fig. 7
98 |99