Permitted Solvents; Safety Information; Service; Warranty - Hedson DRESTER RDX 9012 Mode D'emploi

Table des Matières

Les langues disponibles

The machine can be used with all thinners and solvent mixtures, such as acetone, toluene, xylene, isobutanol (2-methylpropan-1-

ol) listed as Group IIA according to IEC 79-20 (EN 60079-20).

In order to maintain the high safety standard of the machine, you should ensure the following:

- that the system is installed in the manner prescribed in this manual

- that the machine is used in the manner prescribed in this manual

- that the machine is maintained in the manner prescribed in this manual

- that only original spare parts are used

- that this manual and the manuals for the Gun Cleaner and the Recycler are kept available and in legible condition nearby the

system.

Always wear protective gloves and goggles (solvent-resistant) when you work with the system, as well as additional personal

protective equipment when appropriate.

Personnel suffering from chronic respiratory problems or allergies to solvents must not operate the system.

A fire extinguisher must always be kept nearby when working with solvents.

Check daily that there are no leaks.

The DRESTER RDX Docking Unit must be removed, opened and cleaned out once a year. The authorised Drester retailer can

advise you further on this matter.

Hedson Technologies AB will replace all faulty parts on the DRESTER RDX 9012 with new parts in accordance with the

"Warranty Terms for Hedson Technologies AB No. 7.2-8". This warranty only remains valid if the machine is used in the

prescribed manner, and it does not cover the cost of repairs. Always state the machine's serial number and year of manufacture if

making a claim under warranty. These can be found on the machine's silver-coloured rating plate.

Manufacturer

Type of machine

Solvent capacity

Compressed air needed

Pump capacity

Liquid pressure

Weight

Overall dimensions

Sound pressure level

INSTR: 11143