Symbols; Description Of The Appliance And Its Accessories; Use - Imetec INTELLIVAPOR ECO Mode D'emploi

WARNING

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

Refer to the illustrative guide at the beginning of this user manual to verify your appliance
equipment. All the figures are on the cover pages of these instructions for use.
1. Removable water reservoir
2. Cable winder hook
3. Cap cover
4. Cleaning cap
5. Technical data
6. On/off button
7. Plug
8. ECO button
TYPE OF WATER TO BE USED
The appliance is designed to work with tap water; however, if the water in your area is
very hard, mix the tap water (50%) with distilled and/or demineralised water (50%). Salt
concentration in water in certain seaside areas is very high: in such cases it is important to
use "demineralised water for irons" available on the market. If in doubt, only demineralised
water for steam irons must be used.
Do not use diluting agents, scented liquids or descaling agents as these substances can
damage the product.
Do not use water from dryers, air-conditioners and rain water.
The boiler may contain some water as each product is tested before
being put on the market.
It is recommended to place a cloth between the iron and the fabric when
using the iron for the first time.
It is recommended to direct a jet of steam into the air before starting to
iron, for any residual condensation to be let out.
Intellivapor technology
This boiler is equipped with "IntelliVapor" technology, which allows you to iron any type of
fabric without having to adjust steam and plate temperature.
Fabrics with the following symbols can be ironed (linen, cotton, silk, polyester wool, and
viscose)

SYMBOLS

9. Steam (ready) LED (green)
10. Boiler cleaning LED (yellow)
11. No water LED (blue)
12. Iron mat
13. Cable duct
14. Plate temperature LED
15. Multi-hole plate
16. Steam button

USE

PROHIBITION
EN
13