Falcon 900S Mode D'emploi page 7

The function is selected by turning the control knob to the
'A' position. This can be selected by either turning the control
knob momentarily anti-clockwise from the zero position
or clockwise past the '9' until the symbol [A ] is shown on
the hob control display. Once the [A ] is displayed, turn the
control knob to the level of your choice (1 to 9). The pan will
heat up at 100% power for a specified time before the power
is reduced to the level selected.
When the Automatic Heat-up function is activated, the hob
control display will alternately flash between the [A ] setting
and the chosen power level.
Once the automatic heat-up time has ended the hob control
display will stop flashing and will display the chosen power
level.
The Automatic Heat-up function can be stopped by either
turning the control knob back to the '0' power setting or
turning the control knob to the '9' power setting.
For your guidance Table 2-2 shows the time available at
100% power depending on the power level selected in the
Automatic Heat-up mode.
Child Lock, L
To prevent the unwanted use of the hob, by children, it can
be locked. This can only be activated when all the cooking
zones are off.
To lock the hob, turn together induction controls 2 and 4
simultaneously anti-clockwise for approximately 3 seconds
until [L ] appears in the hob control display for all cooking
areas.
This will NOT affect the oven; it can still be used.
To unlock the hob, turn controls 2 and 4 simultaneously anti-
clockwise until the [L ] symbol disappears.
Low Temperature Setting, U
Each cooking area is equipped with a Low Temperature
Setting. Turn the control knob clockwise to between
the 0 and the 1, until [U ] is displayed. This will maintain a
temperature of around 65°C, which will keep food warm or
water very gently simmering ready to cook vegetables or is
useful for melting butter without it burning.
The maximum time this setting can be used is 2 hours. To
increase the heat, just turn the control knob to the required
level.
Power Boost Setting, P
All of the induction cooking zones have Power Boost
available, activated by turning the control knob clockwise
until [P ] is shown on the hob control display.
Power Boost allows additional power to be made available for
each of the cooking areas. This is useful to bring a large pan of
water to the boil quickly.
The Power Boost function operates for a maximum of 10
minutes on each zone, after which the power is automatically
reduced to setting 9.
When using the Power Boost function, the cooking areas are
paired.
�����������
�
�
�
�
�
�
�
�
ArtNo.051-0001 - Induction power levels
�
5
����������������������
�����������������
����
����
����
����
����
����
����
����
����
Table 2-2
English