LAVAZZA Modo Mio MilkUp Mode D'emploi page 18

EN
No liability is held for damage caused by:
• incorrect use not in accordance with the
intended purposes;
• repairs not carried out by authorized service
centres;
• tampering with the power supply cable;
• tampering with any parts of the appliance;
• the use of non-original spare parts and
accessories;
• storage at temperatures below 4°C;
• use in places with temperature below 10°C or
above 40°C;
• use in places with relative humidity above
95%;
In these cases, the warranty is not valid.
Remove any packaging materials and check that
all components are present. Before the appliance
is used for the first time, or after extended periods
of non-use, it should be thoroughly cleaned as de-
scribed in the section "MAINTENANCE AND
CLEANING".
This appliance can only be operated with orig-
inal accessories provided by the manufactur-
er. No liability will be assumed for any dam-
age caused by misuse of the milk frother or
non-compliance with the instructions contained
in this manual.
STARTING THE MILK FROTHER
Position the appliance on a stable, flat surface,
away from water and heat sources. The appli-
ance should only be connected to an earthed
socket installed in accordance with the regula-
tions. Make sure that the supply voltage corre-
sponds with the voltage marked on the rating
label of the appliance. This product complies
with all binding CE labelling directives.
The first time you use the milk frother, remove all
cardboard and plastic packaging. Lift the milk con-
tainer (1) and remove the protective ring (2) locat-
ed inside the base. Place the container on the base.
PREPARATION OF THE MILK FROTHER
1
2
This appliance has only been designed to
heat and froth milk and prepare hot choco-
late. Do not put any other types of liquid or
solid substances in the container, other than
those indicated by Lavazza. Do not leave
the milk frother unguarded when operating.
Do not leave the milk frother unattended when
in use.
To get the best results, use cold milk from the
fridge.
Make sure that the bottom of the container and
the contact area inside the base are clean and dry.
FILLING AMOUNT
Always respect the MIN and MAX level marked
inside the container.
Do not operate the milk frother with an empty
container or with a quantity of milk below the
MIN level 60 ml. This can cause the appliance to
overheat. In case of overheating, the appliance
will automatically turn off. Do not fill the con-
tainer over the MAX level, it may cause hot milk
to splash.