Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions Flake Crusher Attachment
Congratulations on the purchase of your new
EN
JUPITER kitchen appliance. You have chosen a
high-quality, modern appliance. Further information
on this and other products is available on our website
at www.jupiter-gmbh.de.
This attachment for the drive unit is intended for crush-
ing flakes from cleaned grains such as oats, wheat, rye,
barley, spelt, buckwheat and linseeds, and from cleaned
spice seeds such as coriander, caraway, fennel etc. in nor-
mal domestic quantities in a domestic environment or in
domestic-like,
non-commercial
Domestic-like applications
staff break rooms in shops, offices, agricultural and other
commercial businesses, small hotels and similar residen-
tial facilities. Only use the appliance for normal domestic
processing quantities and periods of time. The appliance is
maintenance-free.
These operating instructions are only valid when used
in conjunction with the operating instructions of the
associated drive unit.
Attachment
Size
862 860
476 860
5
462 860
Please read the operating instructions and, in particu-
lar, the safety notes, before using the appliance for
the first time.
Keep the operating instructions safe and always store
them with the appliance.
Important safety notes
CAUTION Rotating parts can cause injury!
•
Never put your hand into the attachment when the mo-
tor is running.
•
The flake crusher attachment may only be operated
when it is completely assembled, with the filling hop-
per
attached.
A
•
Children should not use the appliance. They should not
play with it either.
•
This appliance may be used by persons with physical,
sensory or mental disabilities, or by those who lack ex-
perience and/or knowledge, if they are supervised or
have been instructed in the safe use of the appliance
and have understood the dangers involved.
•
The appliance may only be repaired by JUPITER cus-
tomer service.
4
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
applications.
include, for example, use in
Associated drive unit
862 1XX
KitchenAid Artisan 4.8l + 6.9l
Kenwood A900 Chef, Major
Scope of delivery
•
Filling hopper
•
Flake crusher attachment (completely assembled)
•
Operating instructions
Components of the flake crusher attachment
•
Filling hopper
A
•
Housing
B
•
Wedge
C
•
Knurled roller
D
with drive shaft
•
Housing cover
E
•
Locking screws
F
F
E
D
Disassembly/Assembly
Remove the filling hopper
1
2
Unscrew both locking screws
3
Remove the housing cover
Pull the knurled roller
4
D
ing
B
.
If it is difficult to remove the knurled roller from
TIP:
the housing, you can press from behind on the plastic
coupling.
Remove the wedge
from the housing.
5
C
•
The attachment can be assembled using the same steps
in reverse order.
IMPORTANT:
•
Do not use force during assembly.
•
Clean any residues from the inside of the housing parts
and
.
B
C
•
Insert the wedge
C
in accordance with its
shape in the housing, i.e. with the long
side at the bottom.
•
If the housing cover
E
check that the wedge
C
rectly.
A
C
B
.
A
F
.
E
.
with drive shaft out of the hous-
C
cannot be fitted,
is positioned cor-
Publicité
Table des Matières
