Hog Slat Grower Select HS583E Mode D'emploi page 5

Ventilation Systems
UNPACKING UNIT
Remove front cabinet door.
Packaged inside cabinet chassis:
1. HS583-50E Hardware Kit
a. Front cabinet door hardware
i. HS583-45 Handle
ii. (2) 605013 Flange head bolts
iii. (2) 60577 Flange nuts
iv. HS612 Tri-handle knob
b. Machine mounting hardware
i. (1) 3/8" x 3" Lag bolt
ii. (6) 3/8" x 2" lag bolts
2. Installation manual
Assembly of Cabinet door with hardware supplied.
HS612 Tri-Handle Knob installs over threaded stud when cabinet door is placed on machine.
Hog Slat Inc. Newton Grove, NC USA May 2019
Door slides under lip at
top of machine
REV A10
Lift up from bottom
and slide door down
to remove.
5