Hog Slat Grower Select HS583E Mode D'emploi page 22

Ventilation Systems
Installation: Remove the top cover screws on the curtain machine and retain screws for re-installation.
a. Install the HS583-100 covers onto the curtain machine as shown below depending upon how
the cables/chains exit the machine. Align the cover over the exit slot in the machine. The
existing holes in the machine will align with the holes marked "R" for the cover on the right
side and the holes marked "L" for the cover on the left side of the machine.
Hog Slat Inc. Newton Grove, NC USA May 2019
Cables/Chains exit both
sides of machine
Cables/Chains exit on
one side of the machine
REV A10
22