Product Specifications - Canadiana 7800903 Mode D'emploi

Product Specifications

Deck Size
(in / cm)
Height of Cut
(in / cm)
Gross Engine Power*
(lb-ft)
Engine Displacement
(cc)
Fuel Tank Capacity
(qt / l)
Oil Capacity
(oz / l)
Spark Plug Gap
(in / mm)
Spark Plug Torque
(in-lb / Nm)
*Power Ratings: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepow-
er values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments.
Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gas engine may
not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety of fac-
tors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel
pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine vari-
ability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for
this Series engine.
CD22550FC
22 / 56
1.25 - 3.75 / 3.18 - 9.53
5.5
140
0.9 / 0.9
15 / 0.44
0.020 / 0.50
180 / 20
C22550FC (2N1/3N1)
22 / 56
1.25 - 3.75 / 3.18 - 9.53
5.5
140
0.9 / 0.9
15 / 0.44
0.020 / 0.50
180 / 20
www.canadianaproducts.ca