Disposal Of The Battery; Guarantee & Service - Philips 1000 Serie Mode D'emploi

Masquer les pouces Voir aussi pour 1000 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
battery at an official collection point for batteries. If you have trouble
removing the battery, you can also take the appliance to a Philips service
centre, which will remove the battery for you and will dispose of it in an
environmentally safe way.

Disposal of the battery

Only remove the battery if it is completely empty.
1
Disconnect the appliance from the mains and let the appliance run
until the motor stops.

Push the middle part of the cutting unit upwards with your thumb
until it opens and then pull it off the appliance (Fig. 10).
Be careful that the cutting unit does not fall to the floor.

Remove the upper housing part from the inner part of the
appliance by means of a screwdriver (Fig. 15).

Separate the lower housing part from the appliance (Fig. 16).
5
Remove the result indicator from the appliance (Fig. 17).
6
Remove the battery by prying it out of the appliance (Fig. 18).
7
Cut the wires and dispose of the battery in an environmentally safe
way.
Do not connect the appliance to the mains again after it has been
opened.
guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
English
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Qc5090Qc5070Qc5070/00Qc5070/80Qc5090/00

Table des Matières