Storage; Disposal - SilverCrest SHBR 100 E3 Instructions D'utilisation Et Indications De Sécurité

Use a dry, lint-free cloth for control unit
ning and care.
RISK OF DAMAGE TO THE PRO-
DUCT OR PROPERTY! Never im-
merse the control
liquids. It may otherwise be damaged.
If the heating pad is slightly soiled, use a dam-
pened cloth and a little liquid mild detergent, if
necessary.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Do
not use chemical cleaning or scouring
agents to clean the heating pad and control
The heating pad and control unit
wise be damaged.
The heating pad is machine-washable.
Set the washing machine at an extra
washing cycle for delicate items at
30 °C.
For ecological reasons, please only wash the
heating pad together with other textiles. Use a
mild laundry detergent according to the manu-
facturer's instructions.
Please note that frequent washing will cause
wear to the heating pad. It should therefore be
washed no more than max. 10 times in a washing
machine throughout its useful life.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Please
note that the heating pad may not
be dry-cleaned, bleached, wrung out, dried
mechanically, mangled or ironed. The heating
pad may otherwise be damaged.
Do not use bleach. Do not use any
cleaning agents containing bleach
(such as heavy duty detergents).
Do not dry in a tumbler dryer.
Do not iron.
Do not dry-clean.
Cleaning and care / Storage / Disposal
clea-
1
in water or other
1
.
1
may other-
1
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Reshape the still damp heating pad to the origi-
nal size immediately after washing, and dry flat,
spread on a clothes drying rack.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Do
not hang the heating pad up to dry
with pegs or similar. The heating pad may other-
wise be damaged.
DANGER OF ELECTRIC SHOCK!
Do not reconnect the control
the heating pad until the plug-in con-
nector
and the heating pad are completely
3
dry. Otherwise there is a risk of electric shock.
DANGER OF ELECTRIC SHOCK!
RISK OF PROPERTY DAMAGE!
Do not under any circumstances switch
the heating pad on to help it dry. Otherwise there
is a risk of electric shock.

Storage

RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Let
the heating pad cool before putting
it away. The heating pad may otherwise be da-
maged.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! To
prevent the heating pad from beco-
ming sharply creased, do not store other objects
on top of the heating pad. The heating pad may
otherwise be damaged.
If you do not intend to use the heating pad for
any length of time, store it in the original pack-
aging in a dry environment and without weigh-
ing it down. Disconnect the plug-in connection
, i.e. the control unit
3 1
to do so.

Disposal

to
1
, from the heating pad
GB/IE 21