Bosch GDE18V-26D Consignes D'utilisation/De Sécurité page 4

2610051575.qxp_GDE18V-16D 8/29/18 2:30 PM Page 4
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery, avoid contact.
If contact accidentally occurs, flush with
water. If liquid
additionally seek medical help. Liquid
ejected from the battery may cause
irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or
modified batteries
unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 265 °F may
cause explosion.
Wear eye and dust protection.
The dust extraction attachment may be
used only with Bosch GBH18V-26,
GBH2-28L, 11255VSR rotary hammers.
When using devices for dust collection and
extraction, be sure these are connected
and used according to tool instructions.
Proper use of dust collection can reduce
dust related hazards.
Empty the dust box before beginning
work, frequently during work, after
completion of work, and before storing the
tool. Be extremely careful of dust disposal,
materials in fine particles form may be
explosive.
Do not throw dust on an open fire.
Combustion from mixture of varnishes,
lacquers, polyurethane, oil or water with
dust particles can occur if there is a static
discharge, electric spark, or excessive heat.
Do not use dust extraction for operations
where dust may include burning, smoking
or smoldering items like hot ashes or
sparks. Fire inside the dust box may occur.
Dust may smolder and set the device on fire
long after work is completed.
Do not use dust extraction with explosive
dusts, varnish, polyurethane coatings,
cleaners, or oil-based paints. Electric
motors create sparks, which may ignite the
dust or fumes.
4
General Power Tool Safety Warnings
contacts eyes,
may exhibit
Specific Safety Rules for Attachment
Follow all charging instructions and do
not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly
or at temperatures outside the specified
range may damage the battery and
increase the risk of fire.
▶ Service
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or
authorized service providers.
Do not use dust extraction when working
on metal. Swarf from drilling metal may be
hot and may spark which may melt plastic
adaptors, vacuum hoses and may cause a
fire inside the vacuum tank or bag.
Do not drill into metal with the dust
extraction system mounted. Hot metal
chips can self-ignite or ignite parts of the
dust extraction system.
Do not drill into wood with dust extraction
system mounted. Wood chips are typically
too large and will clog the dust channel.
Do not use to clean asbestos.
To prevent damage to the HEPA filter, do
not use this dust extraction attachment
when drilling with liquids or into wet
materials. Replace the HEPA filter when
collected dust particles may not be
removed from the filter material. Damaged
filter may create a risk of exposure to
crystalline silica dust.
Note: Do not use the dust extraction system
when chiseling, driving screws or cutting
threads.