Storage And Downtime Maintenance - GOAL ZERO YETI 1500X Mode D'emploi

power source, whether it's a solar panel or a wall charger, the Yeti may take a minute to
detect and adjust its charge circuitry before it starts drawing power from the source.
5. The WiFi symbol indicates the Yeti's WiFi is turned on. If flashing, the Yeti is ready to
connect to a device.
Front Buttons:
Pressing the LIGHT button will turn the display backlight on and off.
Pressing the UNIT button will scroll through different output and power consumption
settings. Hold units + info to perform factory reset. this deletes wifi information and
configurations. Hold units to reset watt hour counter.
Pressing the INFO button will alternate the screen between showing the detailed battery
state of charge percentage and the Time to Empty/Full.

Storage and Downtime Maintenance

Having your Goal Zero Yeti connected to a power source, like a solar panel or wall plug,
between adventures or while in storage keeps its battery healthy and topped off. This
prolongs battery life and will ensure your Goal Zero Yeti is charged and ready to go all
day, every day.
If you can't keep your Goal Zero Yeti plugged into a power source during storage,
fully-charge your Goal Zero Yeti every 3 months and store it in a cool, dry place. If
the Yeti has not been used for several months, it may require several charge cycles
to restore accurate results on the battery percent and time remaining values on the
screen. Failure to maintain your Goal Zero Yeti by following these steps can result in
battery damage which will void the product warranty.
9