Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
On/Off
nu
K
3
Cool
Set to
Cool
Return
Setting
4
Cool
Set to
Cool
Return
Setting
Low
Medium
High
5
English
●
Press On/Off button.
The Operation lamp (green) will
illuminate and the system will start
operating.
●
The setpoint will increase by
1°F (or 1°C) when
74
and decrease by 1°F (or 1°C) when
F
button is pressed.
*
Setpoint is not available in fan or dry mode.
●
To change the fan speed, press the Fan
speed control button and select the
74
desired fan speed from Low, Medium or
F
High.
*
Only two fan speed adjustment levels, low and high may be
available depending on the type of indoor unit.
*
The system may be in automatic fan speed control for equipment
protection purposes.
*
The system may be in automatic fan speed control according to
the room temperature. It is normal for the fan to intermittently stop
operating.
*
It is normal for a delay to occur when changing the fan speed.
●
Adjust Air Flow Direction from the main menu
(see page 23)
*
If the connected indoor unit model does not include oscillating
louvers this function will not be available.
button is pressed
.
11
Publicité
Chapitres
Table des Matières
