Introduction; Safety Instructions - Caframo BDCMN003 Mode D'emploi

Introduction

All Caframo stirrers are specifically designed for professional use in the laboratory
and for use in industry to stir numerous liquids with various properties and
applications.
BDC1850 - Rotates at 12-1800 rpm with a maximum torque of 583 Ncm
BDC3030 - Rotates at 20-3000 rpm with a maximum torque of 350 Ncm
BDC6015 - Rotates at 40-6000 rpm with a maximum torque of 175 Ncm
The stirrer uses a high efficiency brushless DC motor. The speed is kept constant
with continuous feedback to the motor. All stirrers have integrated overload protec-
tion which ensures no damage can occur to the electronics, motor or transmission
when an overload situation occurs, such as too great a torque demand or stirrer
overheating.
The stirrers incorporate smart logic for automatic transmission control. This logic
determines the appropriate speed range at which the stirrer should operate. See
Torque Capabilities section. The automatic selection can be overridden by press-
ing the speed button.
The stirrer is designed for reliability and durability. There are no wear parts that
require user service during the normal life of the stirrer.

Safety Instructions

1. Before use, all operators must be familiar with the stirrer and should
read this entire manual as labeled on the back of the stirrer. If the
Read operating instructions
carefully and in full.
Betriebsanleitung gründlich
stirrer is used with accessories not provided or recommended by the
und aufmerksam lesen.
Lire le mode d'emploi
attentivement et intégralement.
manufacturer, or used in a manner not specified by the manufacturer,
Lea las instrucciones de uso en
su totalidad y detalladamente.
the protection provided by the equipment may be impaired.
2. T he stirrer must be securely fixed to a stable support. Mount to a Caframo
Stand (Part Number A110) with a Caframo clamp (Part Number A120). If
other stands or clamps are used, the stirrer must be secure to prevent fall
if tipped up to ten degrees from the vertical.
3. T he stirrer must be supplied with the voltage specified on the serial label.
CAUTION: This is not an explosion proof stirrer. Do not use with highly
4.
flammable or explosive materials. Do not operate the stirrer in explosive
atmospheres, with hazardous substances or under water.
5. Spinning impellers can cause severe personal injuries. Operators must
use extreme care and good judgement when mixing at any speed. The
stirrers have higher torque capabilities than conventional stirrers.
3