Device Use; Cleaning And Maintenance - STAMONY ST-VP-400 Manuel D'utilisation

1. Microphone
2. IR LED
3. Camera
4. Speaker
5. Call buton
6. Connector
7. Volume regulator
8. Rain cover
3.2. PREPARING FOR USE
ASSEMBLING THE DEVICE
3.2.1. OUTDOOR STATION INSTALLATION
1) Install a rain cover on the wall in accordance with the
dimensions given in the drawing.
1
2) Loosen the screw at the bottom of the outdoor
station using the wrench provided.
3) Separate the outdoor station from the installation
box.
4) Connect the cable in accordance with the connection
diagram (section 3.2.3) and adjust the volume.
2 3 4
5) Screw the installation box to the rain cover, then fix
the front part of the outdoor station and tighten the
bottom screw.
5
3.2.2. INDOOR MONITOR INSTALLATION
Fasten the monitor holder to the wall with screws. Connect
the wiring according to the diagram (section 3.2.3)
EN
After connecting the cables, place the monitor on the
holder, connect the power adapter, and then connect it to
the socket.
Caution: When choosing the mounting location for internal
monitors, refer to the guidelines in sections 2 and 3.4.
3.2.3. ELECTRIC SCHEMA
Outdoor station Monitor
Cables:
1. Audio
2. Grounding
3. Video
4. Power supply
Description:
1. Ports 1,2,3,4 on the outdoor station should be
connected to terminals 011, 012, 013, 014 on the
indoor monitor.
2. Connection + - on the internal monitor should
connect to the charger.
3. Connections 5,6 at the outdoor station should be
connected to an electric lock.
Cable type: 4 connecting cables (4-wire RVV).
Maximum working distance: 50m.

3.3. DEVICE USE

3.3.1. RINGTONE SELECTION
To select the ringtone melody, press the camera preview
icon 1 for 4 seconds. Then press the door open icon to set
the volume.
To accept the settings, press the conversation start / end
icon.
10
To mute the monitor, press the icon shown in the figure
below for 4 seconds. The LED indicating the mute mode will
light up on the top of the monitor. When the connection
is established, the monitor will not ring, only the image will
be visible.
3.3.2. CALLING
Press the first button on the outdoor station to connect to
monitor A. The monitor will then emit sound in accordance
with the settings and the screen will show the image
recorded by the camera of the outdoor station.
In order to start a conversation with a person outside, press
the icon shown in the figure. At the same time, the voice
connection indicator on the top of the monitor lights up.
To end the conversation, press the icon indicated in the
drawing again.
Caution: During the conversation it is possible to set the
volume, brightness and contrast of the screen.
3.3.3. OPENING THE DOOR
To open the door, press the icon shown in the figure.
EN
3.3.4. CAMERA PREVIEW
To get a preview from camera 1 or 2, press the camera
preview icon with the appropriate number. The view time
is about 20 seconds, after which the screen turns blank.
While previewing the camera image, it is possible to unlock
the door, receive a voice call and set the contrast and
brightness of the screen.
Caution: The set includes one camera.
If the other camera is not connected, a blue screen will
appear after pressing the camera preview icon 2.
3.3.5. SETTING THE CONVERSATION VOLUME AS WELL
AS THE SCREEN BRIGHTNESS AND CONTRAST
To make settings, during the conversation or preview the
camera image, press the Menu button. The screen will
show „Brightness". Adjust brightness using the buttons
.
To set the contrast, press the Menu button again. The
screen will show „Color". Another press of the Menu button
will switch the settings to volume. The screen will show
„Volume". Then you also need to make settings using the
buttons .

3.4. CLEANING AND MAINTENANCE

a) Do not spray the device with a water jet or submerge
it in water. (outdoor station also)
b) The device must be regularly inspected to check its
technical efficiency and spot any damage.
c) Use a soft cloth for cleaning.
d) Do not use washing up liquid, window cleaner, paint
thinner or corrosive liquids for cleaning.
e) The indoor station should not be installed in a place
with high humidity and temperature (e.g. near a
fireplace).
f) Avoid knocking or knocking on the handset.
11