Factory Settings; Troubleshooting - Medion Powerline MD 87309 Mode D'emploi

13. Factory settings

Both of the Powerline Adapters included in the set you
have purchased are paired on delivery.
This default setting will be lost if the network key is
changed or individual adapters are separated from the
network.
How to reset the factory settings:
 Press the SECURITY/RESET button on both
Powerline Adapters for approx. 10 - 15 seconds.
All LED displays will briefly go out. The device will
be reset and then restarts. The process has been
completed when the Power LED is constantly lit.

14. Troubleshooting

If errors occur, check first whether you can correct the
problem yourself. The following list may help you.
CAUTION
Never try to repair the device
yourself. Contact our service centre
or another suitable specialist
workshop if a repair is necessary.
48 of 82