U.S.Robotics USR5455 Guide D'installation Rapide page 8

English
If you are using a Windows operating system, you can use the setup program on
the USRobotics Installation CD-ROM to install and run the Network Device
Locator and configure basic settings in one easy, continuous process:
1. Insert the USRobotics Installation CD-ROM in the CD or DVD drive.
If the CD doesn't start automatically, start it manually as follows:
A. Windows Vista: Click Windows Start > Computer.
Windows XP: Click Windows Start > My Computer.
Windows 2000: On the desktop, double-click My Computer.
B. Double-click the CD drive.
2. If prompted, click Run autorun.exe. If prompted by User Account Control,
click Continue.
3. If prompted, select your preferred language. If asked to read the license
agreement, read the agreement and click Yes.
4. Click Setup and follow the on-screen instructions to install the locator.
When the locator is installed, it starts automatically:
5. Click Next.
6. If your computer has more than one network adapter, select the one that is
connected to the same network as the access point and click Next.
6