U.S.Robotics USR5455 Guide D'installation Rapide page 13

The Network Device Locator does not find the Wireless
Point
1. Click Detect to rescan the network.
2. If the locator still does not find the access point, look at the client list for the
networking device that is connected to the access point. Refer to the device's
documentation to find out how to view the client list.
3. In the client list, find the MAC address shown on the bottom of the access
point and note the IP address associated with that MAC address. This is the
IP address of the access point.
4. Start a web browser, type the IP address of the access point, and press
ENTER.
5. Verify that the connection information is correct for the network to which
the access point is connected.
MAX
The Wireless
wireless device
The access point may not be broadcasting its network name. Ensure that the net-
work name is being broadcast as follows:
1. Using a computer connected to the same networking device as the access
point, start a Web browser.
2. Type the IP address of the access point, and press ENTER to display the
configuration pages of the access point. You can get the IP address from the
locator.
3. Click the Wireless tab and verify that Broadcast network name is selected.
If it is not selected, select it, scroll to the bottom of the Wireless page, and
click Save.
My wireless device is not communicating with the Wireless
Point
! The access point may not have received a valid IP address for your network.
If the IP address is set to Dynamic, make sure that the access point is con-
nected to a DHCP server. If you use a static IP address, verify that it is in the
same subnet as your wireless device's IP address.
! The access point may not be responding. Try the following:
1. Reconnect by following the steps in "Connecting a Wireless Device" on
page 8.
2. If you still are not communicating with the access point, restore the fac-
tory default settings of the access point to reactivate it.
N o t e : When you restore the factory default settings, the access point
will lose all custom settings.
g Access Point does not appear when I scan for it with a
English
MAX
g Access
MAX
g Access
11