Festo CPV-GE-CO3-8 Serie Mode D'emploi page 26

6 Addressing
The following applies in general for addressing the
CPV Direct:
1. A CPV valve terminal always occupies 16 output
addresses.
A CP valve location occupies two addresses:
2. CP valve terminals, electric output or input modules on
the CP extension string each occupy 8, 16,
output addresses depending on the design. Note the
relevant documentation for the module.
Details and examples of addressing the CP system can be
found in the manual P.BE−CP−CO3−...
26
lower−value address = pilot solenoid 14
higher−value address = pilot solenoid 12
Festo CPV...−GE−CO3−8 0709NH English
input or