Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Before starting, make sure that the blender is
unplugged and container is not positioned on
the blender.
2. Put ingredients into container and cover it. Do not
fill above MAX fill line.
3. With the unit in STANDBY
container on blender base. Be sure container is
fully seated and that drive coupling is properly
engaged. Plug blender cord into outlet.
4. This blender has 2 speed settings: HI
to desired position. To crush ice quickly, use HI
5. When finished blending, set paddle switch to STANDBY
6. This blender is equipped with a PULSE
down to engage PULSE
paddle switch is released.
7. Allow motor to come to a complete stop before removing container from
blender base. Never place the container on the motor base or remove it
from the motor base while motor is running.
8. Always hold container with one hand when starting and while blending.
Never operate without jar lid.
9. Wash and dry container after each use. See Cleaning and Sanitizing
Instructions.
1. Before starting, make sure that the blender is
unplugged and container is not positioned on
the blender.
2. Put ingredients into container and cover it. Do not
fill above MAX fill line.
3. Place container on blender base. Be sure container
is fully seated and that drive coupling is properly
engaged. Plug blender cord into outlet.
4. This blender is equipped with an electronic membrane keypad. The
keypad has a main power STANDBY
and PULSE
5. Press the STANDBY
illuminate. For continuous operation, press either LO or HI
When finished blending, press STOP
press the PULSE
button is released.
NOTE: Your MX Electronic Blender uses a Slow Start
pressing HI , the unit will start in the LO speed for 2 seconds and
then switch to HI
ingredients in container.
MX MECHANICAL SWITCHES
function. Unit will run on HI
MX ELECTRONIC TOUCHPAD SWITCHES
WITHOUT SOUND ENCLOSURE
buttons.
button to turn on the blender. Green LED will
button; motor will run on HI
speed. This allows for a more even blending of
position, place
and LO . Press paddle switch
option. Hold paddle switch
button, plus HI , LO , STOP
. For momentary operation,
3
speed setting.
position.
speed until the
button.
speed until the
feature. When
™
Publicité
Table des Matières
