Hanhart PRISMA 200 Mode D'emploi & Garantie page 14

- Use the START/STOP key to increment the flashing digit (0-5 or
0-9).
- Press the FLYBACK-SET key
(on the upper side of the case)
the value. This completes the entering process.
- In the display, Timer 1 is visible.
h) Setting the clock time
- Select the clock by pressing the DISPLAY/SELECT key.
- Select the digit to be entered by pressing the SET/DIGIT key, the
digit selected will flash.
- Use the START/STOP key to increment the flashing digit (0-5 or
0-9)
- Press the SET-FLYBACK key
(on the upper side of the case)
the value. This completes the entering process.
Consumers are legally required to dispose of
batteries at suitable collection points, ven-
ding points or dispatch bays. The crossed-out
wheeled bin means that batteries must not be
disposed of in the household waste. Pb, Cd
and Hg designate substances that exceed the
legal limits.
PRISMA400
Temperature range
to enter
- in use
- in storage
Battery
to enter
TECHNICAL DATA
-10 to +55°C
-20 to +60°C
- type AA (R6)
- useful life approx. 1,5 years
- battery life When the voltage sinks below a minimum
indicator level, the function window begins to flash. At
this point, there is sufficient power for about
30 hours.
Display
6 Digits, size of digits 22/8 mm
second
or
minute
clock
Case
ABS, diameter 115 mm
Weight
390g
Accuracy
+/-7 sec./month
Time units
1/10 sec. or 1/100 min.
23