Quick Start; De-Activation; Setting The Clock - CASO DESIGN MCG30 Chef Manuel

13.7 Quick start

Utilise this function to programme the oven for comfortable cooking at 100%
microwave performance.
Press the Start/Quick start button in quick sequence to set the cooking time.
If you press the button Start/Quick once, the oven will work for 30 sec., if
you press it twice, it works for 1 min.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.

13.8 De-activation:

In order to interrupt an ongoing cooking programme, you can proceed as
follows:
Pres the Stop button once. The cooking programme that is in use will be
stopped.
Open the door of the device. The cooking programme that is in use will be
stopped.
► To continue the interrupted cooking program, press the button
Start/Quick start after closing the door.
To terminate the interrupted program, press the button Stop a second time.
► Before beginning a different cooking process you must delete the
display and reset the system by pressing the button Stop.

13.9 Setting the clock

To set the clock on the device, proceed as follows:
 Activating setup mode
Press the button Time/Weight to switch the oven from the 24 hour system to
the 12 hour system.
 Setting the hours
Turn the control dial Time/Menu until the correct hour is displayed.
Press the Time/Weight button to save the set hour.
caso MCG30 Chef (pure white, black)
Please note
Please note
59