Information About New-Generation Cooling Technology; Chapter -2: Your Fridge Freezer - Sharp SJ-B2237E1X-EU Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
CHAPTER -1: SAFETY INSTRUCTIONS
Before Using your Fridge
• Before setting up your fridge freezer, check for any visible damage. Do not install or use your fridge
freezer if it is damaged
• When using your fridge freezer for the first time, keep it in an upright position for at least 3 hours before
plugging into the mains. This will allow efficient operation and prevents damage to the compressor.
• You may notice a light odour when using your fridge freezer for the first time. This is perfectly normal and
will fade away as the fridge starts to cool.

Information about new-generation cooling technology

Fridge freezers with new-generation cooling technology have a different working system than static
fridge freezers. In normal fridge freezers, humid air entering the freezer and the water vapour emanating
from the foods, turns into frost in the freezer compartment. In order to melt this frost, in other words
defrost, the fridge has to be unplugged. In order to keep foods cold during the defrosting period, the
user must store the food elsewhere and the user must clear the remaining ice and accumulated frost.
The situation is completely different in freezer compartments equipped with new-generation cooling
technology. With the aid of fan, cold and dry air is blown throughout the freezer compartment. As a
result of the cold air that is blown easily throughout the compartment – even in the spaces between
shelves – foods are frozen equally and properly. And there will be no frost.
The configuration in the refrigerator compartment will be nearly same as the freezer compartment. Air
emitted by the fan located at the top of refrigerator compartment is cooled while passing through the
gap behind the air duct. At the same time, air is blown out through the holes on the air duct so that
cooling process is successfully completed in the refrigerator compartment. Holes on the air duct are
designed for even air distribution throughout the compartment.
Since no air passes between the freezer and refrigerator compartment, odours will not mix.
As a result, your fridge with new-generation cooling technology is easy to use and it offers you an
access to a huge volume and aesthetic appearance.

CHAPTER -2: YOUR FRIDGE FREEZER

2
3
4
5
6
7
8
9
This figure has been drawn for information purposes to show the various parts and accessories in the appliance.
Parts may vary according to the model of the appliance.
A
13
12
11
A) Refrigerator compartment
B) Freezer compartment
1) Refrigerator lamp and cover
2) Control panel
3) Fridge shelves
10
4) Wine rack *
5) Crisper cover
6) Crisper
7) Freezer upper flap
8) Freezer upper drawer
B
9) Freezer bottom drawer
10) Freezer shelves *
11) Bottle shelf
12) Adapti-Lift * / Door upper shelf
13) Door upper shelf
EN -6-
1
* In some models
Egg holder
Ice tray

Publicité

Table des Matières
loading

Table des Matières