Before First Use; Personal Data - Inventum PW708ZW Mode D'emploi

4

before first use

Before you use the appliance for the first time, please do
as follows: carefully unpack the appliance and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation. Place
the scale on a firm, flat surface. Remove the batteries from the
protective packaging and insert with the correct polarity. See
the diagram inside the battery compartment.
Press the UNIT button on the back of the scale to select the
correct measuring unit (kg/st/lb).
kg = kilograms
lb = pounds
st = stone
Place the scale on a flat and stable surface and wait for the scale
to turn itself off.
Before the first use the scale must be calibrated. This must be
done every time you use the scale on a different spot or when
the batterie is replaced.
Place the scale on a flat and stable surface. With your foot press
on the middle of the glass surface. The full display will show and
when it shows "0.0" the scale is ready for use.
5

personal data

You must enter personal user parameters in order to measure
your body fat percentage and other physical data. The scale has
10 memory positions in which you and other members of your
family can save and retrieve personal settings. Now you can
enter the following setting:
Memory position (P) P0 to P9
Body size 100 to 240 cm/3 ft 3 inch~7 ft 10inch
Age 10 to 80 years
Gender
male ( ), female ( )
Sportsman or
-woman
sportman ( ) or sportswoman ( )
For people who exercise regularly.
• Press the SET key when the display is switched off to change
the setting.
14
• English
• Press the SET key again to select the correct user, press the
or keys and press the SET key again to confirm.
• After you have entered the correct user, the symbol for
gender will blink. To select the gender (male, female,
sportsman, sportswoman), press the
the SET key again to confirm.
• After you have entered the gender, the indication for body
size (height) will blink (preset 165 cm). To set your own height
press the or keys and press the SET key again to
confirm.
• After you have entered your body size, the indication for age
will blink (preset 30). To set the correct age (male, female,
sportsman, sportswoman), press the
the SET key again to confirm.
After all parameters have been entered, you can now measure
your weight, body fat and the other data. The display will show
0,0 kg.
Stand on the scale barefoot immediately and let the scale
perform a measuring. When you step on the scale the next time
the scale will recognize you. When you step off the scale, the
scale will switch off after a few seconds.
TIP: To reset a memory position for another user perform the
same steps as described above. All positions are preset.
or keys and press
or keys and press