Associated Standards And Regulations; Technical Data; Accessories - IKA-WERKE REO basic C Mode D'emploi

Protective conductor:
On the under side of the mounting plate are areas (bare metal)
and can be used as a test point for the protective conductor. It
may be necessary to rempve an oxide coating for the subse-
quent tests.

Associated standards and regulations

Construction in accordance with the foolwing safety standards
EN 61 010-1
UL 3101-1
Construction in accordance with the foolwing EMC standards
EN 61 326-1+A1
Associated EU guidlines
EMC-guidlines: 89/336/EWG
Machine guidelines: 73/023/EWG

Accessories

RS 1 set of stirring bars
RSE PTFE stirring bar remover
H 44 cross sleeve
H 36 holding rod
Recommended IKA-stirres
TRIKA-stirrers PTFE, triangular
lengths 25, 40 and 55 mm
IKAFLON-stirrers PTFE
dia 6mm lengths 10 and 15 mm
dia 8mm lengths 20, 25, 30, 40, 50 and 60 mm
8
EN 61 010-2-10
CAN/CSA C22.2 (1010-1)
H16V support rod

Technical data

design voltage: VAC 220 - 240 ±
oder VAC 115 ±
oder VAC 100 ±
design frequency: Hz
Drive:
Max. power consumption W
/ output:
speed range: rpm 50...1500
speed variety (without load, %
1500rpm):
stirring quantity (H O): l
2
diameter of mounting plate: mm 135
permitted ambient
temperature: °C
permitted relative humidity: %
permitted duration of operation: %
prozection class acc. DIN 40 050:
fuses:
contamination level:
overvoltage category:
protection class:
operation at a terrestrial altude m
dimensions: mm 160 x 280 x 85
weight: kg
10%
10%
10%
50/60
EC-motor with ball bearings,
without brushes
12 / 5
infinitely variable setting
-5.....+15
20
+5 to +40
80
100
IP 42
F1/F2 10AT/250V
Id-Nr 14 080 00
2
II
1(protective earth)
max 2000 above sea level
2,4
REO BC 0502