Honeywell Prestige THX9000 Manuel D'utilisation page 21

In case of difficulty
Heating or
• Press
cooling system
does not respond
• Press
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• If "Waiting For Equipment" is displayed, the compressor protection
to set system to Heat. Make sure the temperature is set
SYSTEM
higher than the Inside temperature.
SYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
timer is on. Wait 5 minutes for the system to restart safely, without
damaging the compressor.
Prestige
19
™ THX9000 Thermostat