Transportation, Storage And Disposal; Technical Data - Zenoah BCZ260L Manuel D'utilisation

Check
Spark plug.
The engine starts but stops again
Check
Fuel tank.
Air filter.

Transportation, storage and disposal

• Remove the spark plug cap before long-term
storage.
• Attach the product during transportation. Make sure
that it cannot move.
• Make sure that there is no risk of fuel leaks, fuel
fumes, sparks or flames during transportation and
storage.

Technical data

Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
353 - 003 - 06.01.2018
Possible cause
The spark plug is dirty or wet.
The spark plug electrode gap is incorrect.
The spark plug is loose.
Possible cause
Incorrect fuel type.
The air filter is clogged.
Transportation, storage and disposal
Technical data
3
Procedure
Make sure that the spark plug is dry and
clean.
Clean the spark plug. Make sure that the
electrode gap is correct. Make sure that the
spark plug has a supressor.
Refer to technical data for correct electrode
gap.
Tighten the spark plug.
Procedure
Empty the fuel tank and fill it with cor-
rect fuel.
Clean the air filter.
• Attach the transport guard to the cutting attachment
during transportation and storage.
• Clean and do servicing on the product before long-
term storage.
• Use approved containers for the fuel when you
transport and store it.
• Empty the fuel tank before long-term storage. Speak
to your local gasoline station to find out where to
dispose unwanted fuel.
BCZ260L
25.4
34
28
3000
9500±500
6500
EXZ260L
25.4
34
28
3000
9500±500
6500
23