Air Filter; Maintenance Schedule - Zenoah BCZ260L Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56

Air filter

Remove dust and dirt from the air filter to keep it clean in
order to prevent:
Carburettor malfunctions.
Starting problems.
Loss of engine power.
Unnecessary wear to engine parts.
Too much fuel consumption.
Clean the air filter at an interval of 25 hours, or more
regularly if conditions are unusually dusty.
To Clean the air filter (BCZ260L, EXZ260L,
BCZ300L)
CAUTION: A damaged, very dirty or fuel-
soaked air filter must always be replaced.
An air filter that has been used for a long time cannot be
fully clean. The filter must be replaced with a new one at
regular intervals.
1. Move the choke lever (3) up, to close the choke
valve.
3
2. Remove the air filter cover.
3. Get the urethane (2).
1
2
Maintenance
Clean the external surface.
Make sure that the throttle trigger lock and the throttle works correctly from a
safety point of view.
Do a check of the stop switch to make sure that it works correctly.
Make sure that the cutting attachment does not rotate at idle speed.
353 - 003 - 06.01.2018
4. Clean it with warm, soapy water.
5. Remove the felt filter (1) from the filter holder.
6. Carefully remove unwanted material from the filter.
7. Use a brush or air to clean the inner surface of the
air filter cover.
8. Make sure that the filter is dry before you assemble
it.
To Clean the air filter (BCZ400L)
CAUTION: A damaged, very dirty or fuel-
soaked air filter must always be replaced.
An air filter that has been used for a long time cannot be
fully clean. The filter must be replaced with a new one at
regular intervals.
1. Remove the felt filter from the filter holder.
2. Carefully remove unwanted material from the filter.

Maintenance schedule

The following is a list of the maintenance steps that must
be performed on the product. Most of the items are
Maintenance on page 19
described in
Note: The user must only carry out the maintenance and
service work described in this operator's manual. More
extensive work must be carried out by an authorized
service workshop.
Daily
Weekly
Monthly
X
X
X
X
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Exz260lBcz300lBcz400l

Table des Matières