Zephyr ZGE-E30AS Guide D'utilisation, D'entretien Et D'installation page 14

Fig.11
10) Place 6" round ducting over blower collar and secure
with aluminum duct tape. If using hood in ductless
recirculating mode turn to page 13.
with local requirements and codes, purchase and install
appropriate connector if necessary.
functions.
Fig.12B
place by using the (10) screws previously removed from
step 2.
11) Secure (2) 1" wood screws (A) into the screw holes on
the hood body to the cabinet base and prevent the hood
from shifting after installation.
12
www.zephyronline.com
A
Fig.12A