Zephyr ZGE-E30AS Guide D'utilisation, D'entretien Et D'installation page 13

Fig.7
Fig.7. Note: The wider portion of the lower installation
1
Fig.9
8) Install (2) 3/16x1" screws into the captive nuts of each
height of range hood until there is no gap between the
cabinet bottom and front edge of hood, Fig.9. After hood
screw from step 7, Fig.8-1.
7) From inside the hood, secure (1) M4x8 screw into
screw is adjustable to accomodate various cabinet
2
B
depths. Inside the hood are (2) thumb screws located
cabinet depths.
11
1
Fig.8
A
Fig.10