Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Original instruction manual
1
Temperature button -
2
Operation MODE button
3
Power button
4
Temperature button +
1. POWER: press this key to turn on/off machine. After machine turns on, default value is cooling
mode with low fan speed.
2. MODE: after machine turns on, press this key to select cooling, dehumidifying and fan mode.
3. SPEED: after machine turns on, press this key to select fan speed (high and low).
4. TEMP- : under cooling mode, press this key to downward setting temperature from 16~31℃.
5. TEMP- : under cooling mode, press this key to upward temperature from 16~31℃.
6. TIMER: under power-on or standby mode, press this key to setup on/off time from 1~24hours.
Remote control
Operation
Cooling mode
· After machine turns on, default value is cooling mode with 22℃ and low fan speed.
· Press "TEMP+" or "TEMP-" to adjust temperature (from 16℃ to 31℃).
· Press "Fan Speed" to select high or low fan speed.
Fan mode
· Press "MODE" to select fan mode, fan mode indicator turns on.
· Press "Fan Speed" to select high speed or low speed.
Dehumidifying mode
· Press "MODE" to select dehumidifying mode, dehumidifying mode indicator turns on.
· Set the selected temperature to current room temperature minus 2℃. (16℃-31℃)
6
5
Sicnal receiver window
6
Fan speed adjustment button
7
Timer on/off button
1
Power
2
Timer
3
Temperature down
4
Mode
5
Temperature up
6
Speed
Note: The remote control must be installed in 2 batteries LR03
AAA/1.5V to work.
En
10/2018
Publicité
Table des Matières
