Alecto AVM-500 Mode D'emploi page 70

GB
3. Use
that must be removed and press the
4. The monitor will emit a tone and the selected
camera is de-registered.
Zoom:
This menu allows you to enlarge the display (move
somewhat closer).
Select
for a normal view.
When the zoom function is enabled, the
appears in the upper part of the display.
Press
Temperature display and alert:
In the upper right corner of the monitor, the tempera-
ture is shown of the room where the camera is located.
Display in °C or in °F:
Choose the option
play to degrees Celsius or select the option
have the temperature shown in degrees Fahrenheit.
Select the desired option and press the
your setting.
Display calibration (correcting):
Choose the option
display: select this option, press the
use the
ture. Press the
press the
To check the alert values:
Choose the options
mum and minimum temperature:
Select
HIGH
the and
mum value; press the
save your setting and press the
the menu.
70
and select the number of the camera
for an enlarged view and select
to save your setting and leave the menu.
°C
and buttons to set the correct tempera-
button to save your setting and
button to leave the menu.
HIGH
or , press the
LOW
buttons to set the maximum or mini-
to set the temperature dis-
to correct the temperature
and to set the maxi-
LOW
button and use
button (or the
button to leave
button.
icon
to
°F
to save
button and
button) to