Crazy Patch; Applique - Singer C430 Manuel D'instructions

Table des Matières

Publicité

CRAZY PATCH

Create interesting surface embellishment by
sewing decorative stitches over the seams. Try
mixing several types of fabrics for even more
variety.
No. 1
All-Purpose Foot or Satin Stitch Foot (A, B)
1. Place two pieces of fabric right sides together
and sew a long straight stitch.
2. Press the seam open.
No. 18, 19
3. With the right side of the fabric facing up, sew
the decorative stitch, making sure the stitches
fall on both sides of the seam.

APPLIQUE

No. 22, 23
All-Purpose Foot (A)
1. Set the applique in place on the base fabric with
temporary fabric spray adhesive or by using
fusible web.
2. Sew with the right side of the stitch following
the right edge of the applique as closely as
possible.
When sewing sharp angles or curves
Bring needle to lowest position and raise the
presser foot.
Use needle as pivot and turn fabric.
Note: Applique can also be done with a satin
stitch using the Satin Stitch Foot (p. 54). It may
be helpful to place a fabric stabilizer underneath
your work, which may help prevent any fabric
puckering.
64

Publicité

Table des Matières
loading

Table des Matières