Before First Use; Maintenance And Cleaning - Di4 Aspirovac Flex 25.6V Mode D'emploi

BEFORE FIRST USE

1. Remove the main body of the appliance and other parts/accessories from the packaging.
2. Unfold the main body to have the handle uprightly fixed.
3. Insert the suction head into the bottom of the main body. Make sure they are fastened firmly. To re-
move the suction head from the main body, press the suction head lock/release button and pull it out.
4. There is a lock on bottom of suction head to fix the brush. Make sure it's locked in place for use.
DEVICE CHARGE
This charge will take approximately 4,5 hours.
1. Attach the charging support piece to the charging support base.
2. Hang the appliance onto the vacuum body hook of the charging base. Make sure the appliance fits
steadily on the base.
3. Plug the charger into the charging base first, and then into the mains socket.
4. Charge the batteries at room temperature between 4 and 40℃.
5. While charging, the pilot light will be flashing to indicate the charger is under working. When the
charging operation is finished, the charger will switch off automatically and the pilot lights will be on
instead of flashing.
6. After charging, unplug the charger from the mains socket and the appliance. Do not use the
appliance while it is connected to the charger. Store the charger in a safe place for future charges.
The appliance is now ready for use.
INSTRUCTIONS FOR USE
1. To switch the appliance on, press the on/off button (u) on the handle. Both the LED lights on the
suction head and the pilot lights on the handheld vacuum cleaner will light on in blue.
2. You can choose the suction power by pressing the high suction power button (v) or low suction
power button (w) on the handle.
3. Animal Pro brush and LED lights on the suction head will be working or stop working at the same
time controlled by the on/off button (x) on the handle. Use the brush to clean the carpet or floor.
4. You can also push up the bending/upright lock (t) on the handle to fold the appliance inwards for
easy cleaning under the beds, desks and other similar places.
5. After use, switch off the appliance and push up the bending/upright lock on the handle to fold the
appliance for easy parking.
TO USE THE HANDHELD VACUUM CLEANER SEPARATELY
1. Press the release button to uncouple the handheld vacuum cleaner from the main body.
2. Take off the nozzle and the small square brush from the back of charging base.
3. Install the nozzle to clean corners and crevices. Install the brush to clean the upholsteries, such as sofa.
4. Press the center of on/off button for handheld vacuum cleaner to make the machine work. Press
the center of the button again to switch off the machine.
5. Put the handheld vacuum cleaner back into its place on the main body after use.

MAINTENANCE AND CLEANING

• Switch off the appliance and let it cool before undertaking any cleaning task.
• Clean the outside of the appliance with a damp cloth. Do not use abrasive products or solvents.
15