Manual Operations - Duramaxx 10027580 Mode D'emploi

Adapters
For the valve adapters you may use, please refer to below table.
All manual operation is temporary and be override till the next commands from thermostat control
unit.
Pre-set Temperatures
• Press the round button on the top of LCD display. The manual operation of 4 diff erent pre-set
temperatures:
• Turning the dial in front of the actuator, can adjust temperature setting value.
ON/OFF and Temporary HOLD
• Press and hold 3 seconds the round button on the top of LCD display. "ON" will appear on display.
Turning the dial to select ON or OF. Press the button to confi rm and quit.
• Turning the dial to Hod appears on display top. Press the button to enter Hold setting. Turning the
dial set HOLD continue hours, from 1 to 24 hours. Press and hold 3 seconds the button to confi rm
the setting and quit.
Manual Operation
8