Display And Product Description; Installation And Adapters - Duramaxx 10027580 Mode D'emploi

Display and Product Description

1 Setting Temperature
2 Comfort/Semi-Comfort
3 Manual Override symbol
4 Economic Setting symbol
5 Anti-Frozen symbol
6 Valve actuator UNIT number
7 Program AUTO Control symbol
8 Temporary HOLD symbol
9 OFF symbol
10 Battery Low symbol
Installing Batteries
• Before fi rst use you have to install batteries. (3 x AA/LR6/AM3 size Alkaline Batteries not Included)
• Press the two sides of the Battery Compartment at bottom of the unit. Then pull it out.
• Insert the batteries to battery compartment. Making sure the battery to match up the + and –
polarity marking.
• Push back battery compartment to the unit.
Installing the Thermostat
Before installing the thermostat to the radiator valve you need to replace the original thermostat
fi rst. The thermostat can be easily to install on all common radiator valve without causing any dirt or
water staining. You no longer need the old thermostat head.
• Lossen and take off the old thermo-
stat head.
• Place the thermostat on to the valve
or adapter, whereby the fl at surface
to point upwards as shown in image
on the right (1).
• Turning the knurled nut forwards
and tighten it fi rmly by hand. Do not
use a tool for this! (2).
• Thermostat is ready for operation.
7

Installation and Adapters