Technical Data - Milwaukee M18 FOPH-HTA Notice Originale

TECHNICAL DATA

CORDLESS HEDGE TRIMMER
Production code.....................................................................
No-load speed .......................................................................
Blade length...........................................................................
Tooth spacing ........................................................................
Cutting capacity .....................................................................
Weight according EPTA-Procedure 01/2014 .........................
Noise/vibration information
Measured values determined according
to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))....................
Sound power level (Uncertainty K=3dB(A)) ........................
Wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration a .........................................................................
h
Uncertainty K= ....................................................................
For technical data and approvals of application heads for use on various powerbases please refer to the operating instructions
of the used application head.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this power
tool. Failure to follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
CORDLESS HEDGE TRIMMER SAFETY WARNINGS
Keep all parts of the body away from the blade. Do not
remove cut material or hold material to be cut when
blades are moving. Blades continue to move after the
switch is turned off . A moment of inattention while
operating the hedge trimmer may result in serious
personal injury.
Carry the hedge trimmer by the handle with the blade
stopped and fi ngers away from all power switches.
Proper carrying of the hedge trimmer will decrease the risk
of inadvertent starting and resultant personal injury from the
blades.
When transporting or storing the hedge trimmer, always
fi t the blade cover. Proper handling of the hedge trimmer
will decrease the risk of personal injury from the blades.
Make sure all power switches are off when clearing
jammed material or servicing the unit. Unexpected
actuation of the hedge trimmer while clearing jammed
material or servicing may result in serious personal injury.
Hold the hedge trimmer by insulated gripping surfaces
only, because the blade may contact hidden wiring.
Blades contacting a "live" wire may make exposed metal
14 ENGLISH
M18 FOPH-HTA
..................... 4697 78 02...
...000001-999999
..... 0-2800 / 0-3500 min
-1
.........................508 mm
...........................25 mm
...........................25 mm
..........................2,6 kg
........................84,0 dB(A)
........................92,4 dB(A)
.......................... 3,5 m/s 2
.......................... 0,8 m/s 2
parts of the hedge trimmer "live" and could give the operator
an electric shock.
Keep all power cords and cables away from cutting
area. Power cords or cables may be hidden in hedges or
bushes and can be accidentally cut by the blade.
Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of lightning.
This decreases the risk of being struck by lightning.
EXTENDED-REACH HEDGE TRIMMER SAFETY
WARNINGS
To reduce the risk of electrocution, never use the
extended-reach hedge trimmer near any electrical
power lines. Contact with or use near power lines may
cause serious injury or electric shock resulting in death.
Always use two hands when operating the extended-
reach hedge trimmer. Hold the extended-reach hedge
trimmer with both hands to avoid loss of control.
Always use head protection when operating the
extended-reach hedge trimmer overhead. Falling debris
can result in serious personal injury.
ADDITIONAL SAFETY WARNINGS
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions to
use the machine, local regulations may restrict the age of
the operator.
Clear the work area before each use. Remove all objects,
such as cords, lights, wires, or strings which can be thrown
or become entangled in the cutting means.
Check the hedge for foreign objects, such as wire fences.
Never use the product near posts, fences, buildings, or
other immovable objects.
Beware of thrown objects; keep all bystanders, children, and
pets at least 15 m away from work area.
Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
Inspect the product before each use. Check for loose
fasteners, etc. Make sure all guards and handles are
properly and securely attached. Replace any damaged parts
before use. Check for battery pack leaks.
Do not modify the product in any way.
Do not allow children or untrained individuals to use the
product.
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of falling
objects, wear appropiate head protection.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Do not use the product when you are tired, ill, or under the
infl uenceof alcohol, drugs, or medication.
Keep fi rmfooting and balance. Do not overreach.
Overreaching can result in loss of balance.
Before starting the product, make sure the cutting blades
will not come in contact with anything.
While operating the hedge trimmer, always hold it fi rmlywith
both hands by the two handles. Ensure that the operating
position is safe and secure. The manufacturer does not
recommend the use of steps or ladders. If higher trimming is
required, use an extended-reach tool.
Blades are sharp. When handling the blade assembly, wear
non-slip, heavy duty protective gloves. Do not place your
hand or fi ngers between blades or in any position where
they could get pinched or cut. Never touch the blade nor
service the product unless the battery pack is removed.
Do not force the product through heavy shrubbery. This can
cause the blades to bind and slow down. If the blades slow
down, reduce the pace.
Do not attempt to cut stems or twigs that are larger than 28
mm, or those obviously too large to feed into the cutting
blade.
Use a non-powered hand saw or pruning saw to trim large
stems.Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay extra
attention to what is going on in the working area.
WARNING! If the product is dropped, suff ers heavy
impact, or begins to vibrate abnormally, immediately
stop the product and inspect for damage or identify the
cause of the vibration. Any damage should be properly
repaired or replaced by an authorised service centre.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors off er to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only System M18 chargers for charging System M18
battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
TRANSPORTATION AND STORAGE
Stop the product, remove the battery, and allow it to cool
before storing or transporting.
Clean all foreign materials from the product. Store the
product in a cool, dry, and well-ventilated place that is
inaccessible to children. Keep away from corrosive agents,
such as garden chemicals and de-icing salts. Do not store
outdoors.
For transportation in vehicles, secure the product against
movement or falling to prevent injury to persons or damage
to the product.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without
further requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to be
carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
RESIDUAL RISK
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
• Injury caused by contact with the blades. Contact with the
blades can cause serious injury. Keep the blade away
from yourself and others. Cover it with the blade protector
whenever you are not cutting.
• Injury caused by vibration
Hold the product by designated handles and restrict
working time and exposure.
• Exposure to noise can cause hearing injury
Wear ear protection and limit exposure.
ENGLISH 15