Atlantis Land I-Fly Wireless Router ADSL Mode D'emploi page 53

•
IP address: leave the field untouched.
•
Authentication Protocol: Default value is "AUTO". The
Other options are "CHAP" and "PAP", in case of doubt leave
default value.
•
PPPoA/PPPoE Connection: Select Always On if you want
to establish a PPPoA/PPPoE session when starting up. It will
also automatically re-establish the PPPoA/PPPoE session
when disconnected by ISP (or for technical reason). Select
Connect on Demand if you want to establish a
PPPoA/PPPoE session only when there is a packet requesting
for going out to the Internet.
•
User Idle-Timeout (in minutes): Auto-disconnect the
I-FLY WIRELESS LAN ADSL ROUTER when there is no
activity on the line for a predetermined period of time. Value
0 disable the function.
Press Apply to set as active the new configuration , then press on
Save Config to FLASH (and then on Save)
configuration.
ENGLISH
to save the
53